Dell PowerConnect M8024 - Line Passwords

Configuring System Information 165
Removing Users From the Local User Database
1. Open the Local User Database page.
2. Click Show All to display the Local User Table page.
3. Select a User Name .
4. Check Remove .
5. Click Apply Changes .
The user is removed, and the device is updated.
Assigning Users With CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide :
• AAA Commands.
Line Passwords
Use the Line Password page to define line passwords for management methods.
To display the Line Password page, click System > Management Security > Line Password in the tree
view.