582 Configuring IPv6
•
Prefer Lifetime
— Specifies the preferred lifetime value in seconds of the prefix associated with a
binding.
Displaying Server Bindings using the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• DHCPv6 Commands
DHCPv6 Statistics
Use the DHCPv6 Statistics
page to display DHCPv6 statistics for one or all interfaces.
To display the page, click IPv6 > DHCPv6 > Statistics in the tree view.
Figure 10-15. DHCPv6 Statistics
To Next Page
Loading...
