Configuring System Information 225
Configuring Notification Filters Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• SNMP Commands.
Notification Recipients
Use the Notification Recipients page
to view information for defining filters that determine whether
traps are sent to specific users, and the trap type sent. SNMP notification filters provide the following
services:
• Identifying Management Trap Targets
•Trap Filtering
• Selecting Trap Generation Parameters
• Providing Access Control Checks
To display the Notification Recipients page, click System > SNMP > Notification Recipient in the
tree view.
To Next Page
Loading...
