Configuring System Information 153
Removing a Rule
1.
Open the
Access Profile
page
.
2.
Click
Show All
to display the
Profile Rules Table
page.
3.
Select a rule.
4.
Check the
Remove
check box.
5.
Click
Apply Changes
.
The rule is removed, and the device is updated.
Defining Access Profiles Using CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• Management ACL Commands.
Authentication Profiles
User authentication occurs locally and on an external server. Use the Authentication Profiles page to
select the user authentication method on the device.
To display the Authentication Profiles page, click System > Management Security > Authentication
Profiles in the tree view.
To Next Page
Loading...
