Viewing Statistics and Remote Monitoring 431
•
Received Errors
— Displays number of received errors on the interface.
•
Transmit Errors
— Displays number of transmitted errors from the interface.
Setting Refresh Rate
1.
Open the
Counter Summary
page.
2.
Select the
Refresh Rate
from the drop-down menu.
Statistics refresh for the displayed interfaces at the selected frequency.
Viewing Numeric Port Utilization Statistics Using the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• RMON Commands
RMON
Remote monitoring (RMON) allows the network administrator to get an idea of the network’s
performance and status through remote access.
To display the RMON menu page, click Statistics/RMON > RMON in the tree view. The RMON
menu page contains links to the following features:
•RMON Statistics
•RMON History Control Statistics
•RMON History Table
•RMON Event Control
•RMON Event Log
•RMON Alarms
To Next Page
Loading...
Need help?
General
