282 Configuring Switching Information
•
IPv6 DSCP Service
— Specify the IP DiffServ Code Point (DSCP) value, which is defined as the high-
order six bits of the Service Type octet in the IPv6 header. This is an optional configuration. Enter an
integer from 0 to 63. The IPv6 DSCP can be selected from one of the DSCP keywords in the menu. To
specify a DSCP by its numeric value, select the Other option in the menu, and a text box displays for
entering the numeric value.
Configuring an IPv6 ACL Rule by Using the CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• ACL Commands
To Next Page
Loading...
