374 Configuring Switching Information
Figure 7-90. Add VLAN Querier
3.
Enter the VLAN ID and, if desired, an optional VLAN name.
4.
Complete the fields on the page as needed.
5.
Click
Apply Changes
.
The VLAN Querier settings are modified, and the device is updated.
Displaying the MLD Snooping VLAN Querier Summary Table
1.
Open the MLD Snooping
VLAN Querier
page.
2.
Click
Show All
.
The
VLAN Querier Summary Table
displays.
Figure 7-91. VLAN Querier Summary Table
Configuring VLAN Querier Settings with CLI Commands
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide:
• IGMP Snooping Commands
To Next Page
Loading...
