576 Configuring IPv6
•
DUID
- Displays selected DUID value or allows entry of new one.
•
Va l id Lif e ti me
— Specifies the valid lifetime in seconds for delegated prefix.
•
Prefer Lifetime
— Specifies the prefer lifetime in seconds for delegated prefix.
•
Delete
— Deletes the displayed pool prefix delegation configuration when checked and
Apply
Changes
is clicked.
Configuring a delegated prefix to a Pool
1.
Open the
Prefix Delegation Configuration
page.
2.
Select the pool to be configured.
3.
Specify the delegated prefix.
4.
Modify the remaining fields as needed.
5.
Click
Apply Changes
.
The delegated prefix and parameters are saved, and the device is updated.
Configuring a delegated prefix using the CLI Command
For information about the CLI commands that perform this function, see the following chapter in the
CLI Reference Guide
:
• DHCPv6 Commands
To Next Page
