96 Configuring Dell PowerConnect
Boot Menu Version: 12 May 2009
Select an option. If no selection in 10 seconds then
operational code will start.
1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):
Operational Code Date: Tue May 26 14:12:20 2009
Uncompressing.....
Target Name: vxTarget
Attached IPv4 interface to motetsec unit 0
Adding 70447 symbols for standalone.
CPU: Broadcom SBC8548. Processor #0.
Memory Size: 0x20000000. BSP version 2.0/2.
Created: May 26 2009, 13:11:31
ED&R Policy Mode: deployed
WDB Comm Type: WDB_COMM_END
WDB: Ready.
remLib: Not initialized.
remLib: Not initialized.
CFI Probe: Found 2x16 devices in x16 mode
volume descriptor ptr (pVolDesc): 0x706d770
XBD device block I/O handle: 0x10001
auto disk check on mount: NOT ENABLED
To Next Page
Loading...
