Dell SC8000 - Page 147

Complete the Startup Wizard
Dell Compellent 137
2 ProceedbasedonwhetheryouuseIPv6forcontrolleraddressing.
a IfIPv6isused,enterIPv6informationforthefirstcontrollerandclickContinue.
b IfIPv6isnotused,clickSkipIPv6Configuration.
3 Configurethefollowingfields:
 ControllerID:IftheHSNforController2isincludedintheli censefile,theadd
controllerprocessusesthatvalueastheControllerIDandadifferentvaluecannot
beentered.IftheHSNforController2isnotinthelicensefile,entertheHSNvalue.
Thedimmed
boxintheprecedingfigureindicatesthattheHSNwasinthelicense
filemakingtheControllerIDboxunavailable.
 Ether0Interface:EntertheIPAddress,NetMask,andGatewayfor theEther0
interfaceonController 2.
 Ether1Interface:EntertheIPAddress,NetMask,andGatewayfor theEther1
interface.UsetheIPaddressfromthe
controller showconsolecommandfor
Controller2.(Usedforcommunicationbetweencontrollers.)
 PrimaryDNSServer:EntertheIPaddressoftheprimaryDNSserver.
 SecondaryDNSServer:(Optional)EntertheIPaddressofasecondaryDNSserver.
 DomainName:(Optional)Enterthedomainnameforthecontroller.
4 ClickContinue.
TheStartupWizarddisplaysamessagethatdataandconfigurationinformationonthe
secondcontrollerislostandasksforconfirmation.
Note: Information displayedinthefollowingfigureisforillustrationonly.
ThevaluesdisplayedareuniquetoeachStorageCenter.