Delta MH300 Series - Page 156

Chapter 7 Optional AccessoriesMH300
7-91
3. My Mode
Press F4 in parameter
setting screen to save
the parameter to My
Mode. To delete or
correct the parameter,
select this parameter
and press F4 for DEL in
the bottom right corner.
Items
It can save 1–32 sets of parameters (Pr).
Setup process
1. Go to Parameter Setup function.
Press ENTER to select the parameter to
use. There is an ADD on the bottom right
corner of the screen. Press F4 to add this
parameter to My Mode.
2. The
parameter (Pr) displays in
My mode if it is properly saved.
To correct or to delete this parameter,
press F4 for DEL.
3. To delete a parameter, go to My Mode and
select the parameter to delete.
Press ENTER to enter the parameter
setting screen. DEL appears in the bottom
left corner of the screen. Press F4 to delete
this parameter from My Mode.
4. After you press ENTER to delete <01
Control Mode>, the <02 Maximum
Operating Frequency > automatically
replaces <01 Control Mode>.
00- 10
0
Speed M ode
0~3 ADD
00- 10
0
Speed M ode
0~3 DEL