Delta MH300 Series - Page 293

Chapter 11 Summary of Parameter Settings
MH300
11-34
Pr. Parameter Name Setting Range Default

06-29 PTC detection selection
0: Warn and continue operation
1: Warn and ramp to stop
2: Warn and coast to stop
3: No warning
0

06-30 PTC level 0.0–100.0%
50.0
06-31
Frequency command for
malfunction
0.00–599.00 Hz Read only
06-32
Output frequency at
malfunction
0.00–599.00 Hz Read only
06-33
Output voltage at
malfunction
0.0–6553.5 V Read only
06-34 DC voltage at malfunction 0.0–6553.5 V Read only
06-35
Output current at
malfunction
0.00–655.35 Amp Read only
06-36
IGBT temperature at
malfunction
-3276.7–3276.7ºC Read only
06-38
Motor speed at
malfunction
-32767–32767 rpm Read only
06-39
Torque command at
malfunction
-32767–32767% Read only
06-40
Status of the multi-function
input terminal at
malfunction
0000h–FFFFh Read only
06-41
Status of the multi-function
output terminal at
malfunction
0000h–FFFFh Read only
06-42 Drive status at malfunction 0000h–FFFFh Read only

06-44 STO latch selection
0: STO Latch
1: STO No Latch
0

06-45
Output phase loss
detection (OPHL) action
0: Warn and continue operation
1: Warn and ramp to stop
2: Warn and coast to stop
3: No warning
3

06-46
Detection time of output
phase loss
0.000–65.535 sec.
0.500

06-47
Current detection level for
output phase loss
0.00–100.00% 1.00

06-48
DC brake time of output
phase loss
0.000–65.535 sec.
0.000