Delta MH300 Series

Chapter 12 Description of Parameter Settings
MH300
12.1-02-13
 When Pr.02-09 is set to 0: the increasing or decreasing frequency command (F) operates
according to the setting for acceleration or deceleration time (refer to Pr.01-12–01-19).
 When Pr.02-09 is set to 1: the increasing / decreasing frequency command (F) operates
according to the setting of Pr.02-10 (0.01–1.00 Hz/ms).
 When Pr.02-09 is set to 2: the increasing / decreasing frequency command (F) operates
according to the pulse of Pr.02-10.