Delta MH300 Series - Page 493

Chapter 12 Description of Parameter Settings
MH300
12
.1-09-6
09-60
Communication Card Identifications
Default: Read Only
Settings 0: No communication card
1: DeviceNet Slave
2: PROFIBUS-DP Slave
3: CANopen Slave / Master
5: EtherNet/IP Slave
6: EtherCAT
10: Backup Power Supply
12: PROFINET
09-61
Firmware Version of Communication Card
09-62
Product Code
09-63
Error Code
Default: Read Only
Settings Read only

09-70
Communication Card Address (for DeviceNet or PROFIBUS)
Default: 1
Settings DeviceNet: 0–63
PROFIBUS-DP: 1–125

09-71
DeviceNet Speed Setting (for DeviceNet)
Default: 2
Settings Standard DeviceNet:
0: 125 Kbps
1: 250 Kbps
2: 500 Kbps
3: 1 Mbps (Delta Only)
Non-standard DeviceNet (Delta only) :
0: 10 Kbps
1: 20 Kbps
2: 50 Kbps
3: 100 Kbps
4: 125 Kbps
5: 250 Kbps
6: 500 Kbps
7: 800 Kbps