Denso BHT-1306BWB - Setting the DNS

115
Barcode Handy Terminal
Setting the DNS
Select “4: SET DNS” at the SET TCP/IP menu and then press the
ENT key.
The SET DNS screen on the right is displayed.
The highlighted setting is the current setting.
Press and hold the BS/C key to return to the SET TCP/IP, FTP, DHCP or
DNS menu.
“1: PRIMARY”:
IP address of the primary DNS server
“2: SECONDARY”:
IP address of the secondary DNS server
“3: DEF DOMAIN NAME”:
Domain name
“4: DEF DOMAIN USE”:
Use of domain
To set the DNS
(1) Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5]) to highlight the item to be set
and press the ENT key
(2) Press the ENT key.
Use the cursor keys ([◄] [►]) to highlight each setting value.
(3) The mode changes to entry mode and the cursor is displayed, allowing the setting to be entered
with the numerical keys and dot key.
To delete a single character, press the BS/C key. To delete the entire entry, press the BS/C key,
or press the SF key and BS/C key simultaneously.
(4) Enter the desired value and press the ENT key.
Press and hold the BS/C key to return to the SET TCP/IP menu.
SET DNS
1：PRIMARY
[ ]
2：SECONDARY
[ ]
3：DEF DOMAIN NAME
⎾ ⏋
│ │
│ │
⎿ ⏌
4：DEF DOMAIN USE
YES NO