Denso BHT-1306BWB - System Mode Basic Operation; Menu Selection and Display

52
BHT-1300B series
4.4.2 System Mode Basic Operation
Menu Selection and Display
Use the following procedure to select and display each menu.
1. Press the numerical key
corresponding to the menu to
be selected.
Alternatively, press the cursor
keys ([▲] [▼]) to select the
menu.
The selected menu item will be
highlighted.
”SETUP” will be highlighted when
System Mode is started up.
2. Press the ENT key.
The selected item is set and the
next screen is displayed.
Press the BS/C key to return to
the previous screen.
The selected item will be
highlighted when returning to the
previous screen.
3. Repeat the above operation to
display the target menu.
[ENT]キー
[BS/C]キー
[4]キー、または[ ]キーか
[ ]キーで[4:SET SYSTEM]を
選ぶ
[2]キー、または[ ]キーか
[ ]キーで[2:DISPLAY]を選
ぶ
Select [4: SET SYSTEM] with
the [4] or [▲]/[▼] keys.
Select [2: DISPLAY] with the
[2] or [▲]/[▼] keys.
ENT key
BS/C key
 Operation example