71
Barcode Handy Terminal
4.5.3 Downloading Files (DOWNLOAD Menu)
Download files to the BHT user area from other devices such as the host computer.
- Point -
If a file with the same name as one already used in the user area of the target memory in
the BHT is downloaded, the newly downloaded file replaces the old one.
If an auto-start execution program has not been specified (See 4.5.6 [1] Setting the
auto-start Execution Program), the directory management program will execute the first
managed program from among the programs (.PD4) downloaded to the BHT when the
BHT power is turned ON. (Program displayed at the top of the “EXECUTE PROGRAM”
menu) Take this into account when determining the file download order.
Refer to “4.3 Executing User Programs” for details.
- Note - A file can also be downloaded via the USB
communication port with the MTP. Refer to “5.4.2
Communication with MTP Connection” for details.
Use the following procedure to download files.
1. Select “2: DOWNLOAD” at the SYSTEM menu and then press the ENT
key.
The screen on the right is displayed.
“1: FILE”:
Select to download a specific file.
“2: HT<-->HT COPY”:
Select to download a file from another BHT.
Refer to “4.5.5 Copying Files between 2 BHT Units” for details.
“4: DRIVE”:
Select to download data to the microSD card.
Press the BS/C key to return to the SYSTEM menu.
The current communication settings display at the bottom of the screen.
Communication protocol type Ymodem
BHT-Ir
BHTp
Ymodem protocol
BHT-Ir protocol
BHT protocol
Interface used Crdl
IrDA
USB
Communication with the CU
IrDA interface
USB cable
Transmit speed 9600 to 460800 Transmission speed corresponding to each
protocol
Refer to “4.5.6 [5] Setting the communication environment” for details of communication environment
settings.
- MTP -
Termination Key:
[BS/C] or [C]
DOWNLOAD
1：FILE
2：HT<‐‐>HT COPY
F4：DRIVE
Internal Memory
[Ymodem] IrDA460800
Communication protocol type
Interface used
Transmit speed
To Next Page
Loading...
