149
Barcode Handy Terminal
2. Use the cursor keys ([▲] [▼]) to highlight the item to be set, and then press the ENT key.
The mode changes to entry mode and the cursor is displayed.
3. Enter a setting value with the numerical keys and dot key.
Press the SF and the BS/C key to change the entry mode (numerical entry (no guidance
display) and alphabet entry).
To delete a single character, press the BS/C key. To delete the entire entry,
press and hold the BS/C key, or press the SF key and BS/C key simultaneously.
4. Enter a setting value and press the ENT key.
Press and hold the BS/C key to return to the FTP MENU screen.
DIR/FILE entry box
: The FTP client will interpret a character string entered into this box as a directory
name at first, and will therefore send a Change Directory request to the FTP server. If the specified
directory exists in the FTP server, the server will change a directory from the default to the specified one; if
not, the FTP client will interpret the entered character string as a file name and send a Download request
to the server.
FIELDS entry box
: It is only necessary to enter field information in this box when downloading a data file.
Before starting downloading, enter field information using the numerical keys and dot key. Pressing the
dot key will enter a comma (,). No entry is required to download program files.
To Next Page
Loading...
