224
BHT-1300B Series
6.2 Using the BHT after Long Periods
Data stored in the BHT may be lost and the calendar clock may stop if the BHT is left unused for long periods of time.
Take appropriate measures in accordance with the procedure below.
Point
*: Files may become corrupt if left for a long period of time without replacing
the battery cartridge.
Insert a fully charged battery cartridge.
* This is used as a memory back-up power source
and therefore should not be removed from the BHT
for at least 10 minutes.
Does the normal
screen display?
The BHT can be used.
Charge promptly before
the battery becomes
fully depleted. (*)
The “Set the current date
and time” screen displays.
The ”Contact your
administrator” screen displays.
Set the current date and
time.
Refer to Chapter 2 “BHT
Preparation” – 2.4 “Initial
Setup”.
Yes
No
Yes
No
The following reasons may be
considered. Contact the system
administrator.
Hardware damage
Application failure
Power ON
Can the power be
turned ON?
To Next Page
Loading...
