142
BHT-1300B series
Upon completion of the PING test, the screen on the right is displayed.
The PING result may include the following:
OK: Displays the number of echo replies.
[XXXXX]: Echo reply time in milliseconds
NG: Displays the number of errors found during the PING test.
TIMEOUT: Displays the number of timeouts (for echo replies) that took
place during the PING test.
IP: Displays the BHT IP address during the PING test only.
Messages displayed during PING test (displayed in center of screen)
Waiting: Setting up the PING test.
Opening device: Opening devices.
Routing TCP/IP: Connecting to the TCP/IP communication pathway.
PING start: Starting the PING test.
Device error: Failed to open a device.
TCP/IP error: Failed to connect to the TCP/IP communication pathway.
PING termination messages (displayed at bottom of screen)
PING end: The PING test has ended normally.
PING aborted: The PING test has been aborted.
PING error: An error has occurred during the PING test.
To Next Page
Loading...
