147
Barcode Handy Terminal
[2] CU-1311 System Information Display
Use the following procedure to display CU-1311 system information.
1. Place the BHT on the CU-1311.
2. Select “6: VERSION” at the SYSTEM MENU and then press
the ENT key.
The SYSTEM INFORMATION screen on the right is displayed.
3. Press the M2 key.
The CU-1311 INFORMATION screen is displayed.
[SYSTEM Ver.]: System program information
[MAC ADDRESS]: MAC address
Press the M1 key to return to the SYSTEM INFORMATION screen.
If the M2 key is pressed when the BHT is not on the CU-1311, the screen
on the right is displayed.
Press and hold the BS/C key to return to the SYSTEM INFORMATION
screen.
To Next Page
Loading...
