231
Barode Handy Terminal
Message BHT Response Cause Countermeasure
After displaying this error
message, the BHT may start
a user program other than
the preset auto-start
execution program or display
the message “No execution
program loaded.”
Your settings made in
System Mode contain an
error.
Contact your system
administrator.
(If this error occurs, the
System Mode settings revert
to the factory defaults.)
If this error occurs, the
warning tone beeps five
times.
An error has occurred
during execution of
System Program.
Unload and reload the
battery cartridge, then turn
the BHT on.
If this error occurs
frequently, contact your
system administrator.
The message is continuously
displayed.
An error has occurred
during execution of
System Program. The
application restarts from
the beginning.
If this error occurs
frequently, contact your
system administrator.
The message is continuously
displayed.
An error has occurred
during execution of
System Program due to
the application. The
application restarts from
the beginning.
Check the application.
To Next Page
Loading...
