Dieci SAMSON AGRI MAX - Page 103

Components description | 8
DOCMA0000006‐UK ﴾ENG﴿ ‐ Samson FPT 3A 103
8.2.15.3 ByPass key
DANGER
Danger of tipping
The ByPass Key must be used only if all of the following conditions occur:
a) Incasethemaximumtippinglimitanddangerofvehicleoverturninghasbeenreached.
b) Byskilledandproperlytrainedpersonnel
c) Forshortperiodsoftime
d) Aftertryingtorestorethesafetyconditionsthroughthevehiclemovementsthatremainedactive.
e) Incaseitisnotpossibletorestorethesafetyconditionsthroughthevehiclemovementsthatremained
active.
f) Whenequipmentwithliftinghook(forkcarrierplate,winch,etc...)isnotbeingused
The ByPass Key (fig. 1509321) is with hold down action,
therefore,mustbemaintainedrotatedduringtheoperationfor
settingthevehicleinsafeconditions.
KeeptheByPasskeyturnedandsimultaneouslyusethejoystick
toreturnthevehicleinsafetyconditions.
WhenusingtheByPasskey,thedisplaywillshowtherelatedicon
"3"(fig.1509322).
TheByPassKeyfunctionturnsoffautomaticallyafter30seconds,
evenifthekeycontinuestoberotated.
After reaching the safety zone, the alarm stops andtheByPass
keycanbereleased.
150932-1
150932-2
DANGER
It is prohibited to use the Bypass key to operate with loads that exceed the capacities established by the
manufacturer.