DigiDesign Control 24 Reference Guide

Control 24 Reference Guide130
B
balanced LINE inputs 42
balanced MIC Inputs 42
BANK RIGHT 61
BANK SELECT 61
bank swapping
how to 61
Bank Switching 61
Buttons
Apply To All Channels 57
Apply To Selected Channels 57
AUX IN 43
AUX OUT 43
Bypass Mode 116
C
cables
audio requirements 8
red Ethernet crossover 12
CD players 16
Channel Bar 59
cleaning 11
CLEAR PEAKS 60
Control 24
and signal routing 103
configuring Pro Tools 28
contents of package 8
focus display in Pro Tools 67
Personality file (Controllers) 28
software 28
system requirements 8
terminology 55
Control Room
using 45
CONTROL ROOM ALT OUT 19
Control Room Monitoring
and surround formats 22
CONTROL ROOM OUT 19
controller focus 117
Counter 61
COUNTER MODE 61
CTL/CLUTCH 57
cue mix connections 17
cue mixes
configuring 100
cue mixes (headphone mix)
setting up 100
D
D.I. Inputs 42
DAE Folder 28
DAT 16
Data Encoder Knob 72
Data Encoders 72
and fine adjust mode 72
data encoders 72
fixed versus velocity 73
DB-25 audio harness 8
DEFAULT 76, 117
DIM
and headphones 19, 44
DOWN 79
DYN 115
bypass mode 74
In/Edit 62, 73
E
EDIT 60
Edit and Timeline linking 88
Edit Mode 116
Edit modes 86
EDIT TOOL 85
Edit Window Follows Bank Selection 62
Editing
automation 127
capturing regions 85
creating regions 85
fine adjust mode 72
moving selection range 84
nudging regions 86
waveforms with the Pencil 87
with scrub/shuttle 83
ENABLE
groups 77
enable
automation 122
EQ 115
bypass mode 74
In/Edit 62, 73
ESC/CANCEL 58
Control_24.book Page 130 Wednesday, January 17, 2001 2:51 AM

DigiDesign Control 24 Specifications

General

Channels	24
Faders	24 motorized 100mm faders
Connectivity	Ethernet
Compatibility	Pro Tools
Audio Interface	No built-in audio interface
EQ	4-band EQ per channel
MIDI I/O	Yes
Footswitch I/O	Yes
Power Supply	Internal