136
Chapter 7 6 HELP Mode
S2-Y1540
HELP Mode : 07
1. Function
2. Operating Procedure
H07 Error count
▼
E01 CCD error
XXXX
(1) Display the error count
• Display the error count of each item.
(1) Display the error count
1. Access the HELP Mode “07”, and press the <START> key.
2. Press the UP/DOWN cursor key to switch pages.
E01 CCD error
E02 Elve. error
E03 Cre. lower
3. Continuously press the <C> in the NUMERIC key for about 3
seconds, and selected error count will be reset with the bleeping
sound.
4. Press the <STOP> key. It will return to the HELP Mode selection
screen.
-0
To Next Page
Loading...
Need help?
General
