161
Chapter 7 6 HELP Mode
7
S2-Y1540
HELP Mode : 59
1. Function
2. Operating Procedure
(1) Adjust the margin jam detecting sensor.
(1) Adjust the margin jam detecting sensor.
1. Access the HELP Mode “59”, and press the <START> key.
2. Press the UP / DOWN cursor key to adjust the sensor detecting
time.
Each time the cursor key is pressed, the detecting time will increase
or decrease by 20 msec.
<C> quick press: sensor OFF
<C> continuous press: return to the default (800 msec)
3. Press the <SET> key, and store the adjustment information in the
memory.
5. Press the <STOP> key. It will return to the HELP Mode selection
screen.
H59
J7 Time Set
XXXXmsec
Set:Save
-0
To Next Page
