162
Chapter 7 6 HELP Mode
S2-Y1540
HELP Mode : 60
1. Function
2. Operating Procedure
(1) Optional function setting
• Air knife
• Double feed detecting sensor
• CCD
• Perforation unit
(1) Optional function setting
1. Access the HELP Mode “60”, and press the <START> key.
2. Select the desired option by pressing UP/DOWN cursor key.
3. Change the setting by pressing the NUMERIC key.
0: Invalid
1: Valid
4. Press the <SET> key, and store the adjustment information in the
memory.
5. Press the <STOP> key. It will return to the HELP Mode selection
screen.
H60 Option
Air knife
X
Dl.feed sen
X
CCD
X
-0
To Next Page
