DURKOPP ADLER 745-35-10 S - Page 202

Programming
200 Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017
Creating a seam program
 The display switches to Create seam program.
Fig. 174: Creating a seam program
Press a button to either open another submenu or enter the desired values
directly using the numeric keypad.
Symbols Meaning
Flap shape seam begin
• straight
• slanted
• slanted
• Set slanted flap shape seam begin. (1 - 13 mm)
Pocket shape seam begin
• straight
• slanted
• slanted
• Set slanted pocket shape seam begin. (1 - 13 mm)
Securement seam beginning left/right needle
• Stitch condensing OR
• Single tack OR
• Double tack