DURKOPP ADLER 745-35-10 S - Page 203

Programming
Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017 201
Flap shape seam end
• straight
• slanted
• slanted
• Set slanted flap shape seam end (1 - 13 mm)
Pocket shape seam end
• straight
• slanted
• slanted
• Set slanted pocket shape seam end (1 - 13 mm)
Securement seam end left/right needle
• Stitch condensing OR
• Single tack OR
• Double tack
Flap left
OR
Flap right
Set positioning point seam begin. (straight pocket only)
• 100 mm - 450 mm
Set positioning point seam center (straight pocket only)
• 100 mm - 450 mm
Set positioning point seam end (straight pocket only)
• 100 mm - 450 mm
Set stitch length main seam
• 1.5 mm - 3.5 mm
Set flap scan
• Fixed seam length
• 1 light barrier
• Automatic flap scan left
Reset seam program
Symbols Meaning