Programming
250 Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017
Machine test
Important
The Machine test menu is protected with a password. You use this
menu to adjust basic machine parameters. The password is 25483.
The display switches to Machine test.
The display varies with the machine configuration ( p. 237).
Fig. 214: Machine test
Symbol Description
USB_Logging p. 251
Set and test hook thread monitor p. 252
Test roll-off device (745-35-10 A only) p. 253
Set and align light barriers p. 254
Adjust and test corner knife p. 256
Switch on needle and middle knife
• Test sewing motor On/Off
• Test middle knife On/Off
• Split needle bar slanted pocket On/Off
To Next Page
Loading...
