Programming
276 Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017
Outputs 745-35-10 A
Y11 Close folding plates
Y12 Open flap clamp
Y13 Downholder on
Y14 Stacker tongs forward
Y15 Stacker bracket swivelled out
Y27 Knife block seam beginning
Y28 Knife block seam end
Y1 Thread cutter top on
Y2 Middle knife on
Y3 Blow bobbin thread monitor, thread advancing device, tape puller
Y4 Open lower thread clamp
Y5 Lower thread cutter on
Y6 Thread tension on
Y7 Lower left transport clamp
Y8 Lower right transport clamp
Y9 Lift folder off
Y10 Lower folder
Y11 Close folding plates
Y12 Open left flap clamp
Y13 Open right flap clamp
Y14 Stacker on
Y15 Needle left on
Y16 Needle right on
Y17 Solve tape
Y18 Close tape cutter
Y19 Open waistband clamp
Y20 Close waistband clamp
Y21 Lift left transport clamp
Y22 Lift right transport clamp
Y24 Pincer stacker: Stacker bracket swivelled out
YC133 Move transport clamp left to the inner side
YC134 Move transport clamp right to the inner side
To Next Page
Loading...
