ELTEX ESR Series - Page 196

ESR-Series. User manual
196
Ste
p
Description Command Keys
27 Set the pool for dynamic allocation of IP
addresses to clients (only for server).
esr(config-ike-gw)# remote
network dynamic pool <NAME>
<NAME> – destination
addresses pool name, set by
the string of up to 31
characters.
28 Set the dynamic establishment mode of
the remote subnet (only for client).
esr(config-ike-gw)# remote
network dynamic client
29 Set access profile for XAUTH
parameters (only for server).
esr(config-ike-gw)# xauth access-
profile <NAME>
<NAME> – access profile
name, set by the string of up to
31 characters.
30 Set access profile and login for XAUTH
parameters (only for client).
esr(config-ike-gw)# xauth access-
profile <NAME> client <LOGIN>
<NAME> – access profile
name, set by the string of up to
31 characters;
<LOGIN> – login for client, set
by the string of up to 31
characters.
31 Define a dedicated IP termination
interface for building IPsec VPN (only
for client).
esr(config-ike-gw)# assign-
interface loopback <INDEX>
<INDEX> – interface index,
takes values of [1..65535].
32 Create IPsec profile. esr(config)# security ipsec
proposal <NAME>
<NAME> – IPsec protocol
profile name, set by the string
of up to 31 characters.
33 Specify IPsec authentication algorithm
(optionally).
esr(config-ipsec-proposal)#
authentication algorithm
<ALGORITHM>
<ALGORITHM> –
authentication algorithm, takes
values of: md5, sha1, sha2-256,
sha2‑384, sha2-512.
Default value: sha1
34 Specify IPsec encryption algorithm
(optionally).
esr(config-ipsec-proposal)#
encryption algorithm
<ALGORITHM>
<ALGORITHM> – encryption
protocol, takes the following
values: des, 3des, blowfish128,
blowfish192, blowfish256,
aes128, aes192, aes256,
aes128ctr, aes192ctr,
aes256ctr, camellia128,
camellia192, camellia256.
Default value: 3des