ELTEX ESR Series - Configuration Example

ESR-Series. User manual
480
•
•
Step Description Command Keys
13 Enable recording of the current tunnel
usage statistics (optional).
esr(config-pptp)# history statistics
14 Change the time interval in seconds
after which the router sends a keepalive
message (optional).
esr(config-pptp)# ppp timeout
keepalive <TIME >
<TIME> – time in seconds,
takes values of [1..32767].
Default value: 10
15 Change the number of failed data-link
tests before breaking the session
(optional).
esr(config-pptp)# ppp failure-
count <NUM>
<NUM> – the number of failed
data-link tests, specified in the
range [1..100].
Default value: 10
15.5.2 Configuration example
Objective:
Configure PPTP tunnel on a router:
PPTP server address: 20.20.0.1;
account for connection – login: ivan, password: simplepass.