ELTEX ESR Series - 19.6 VoIP configuration example

ESR-Series. User manual
565
Step Description Command Keys
8 Select the transport protocol
(optionally).
esr(config-pbx-reg-server)#
protocol {tcp | udp }
The default is udp.
9 Trunk activation. esr(config-pbx-reg-server)# enable
19.6 VoIP configuration example
Objective:
Connect analogue telephones and fax modems to the IP network via ESR router. SIP server, located on the
ESR, functions as proxy server and registration server.
Solution:
Configure a SIP profile:
esr(config)# sip profile 1