ELTEX ESR Series User Manual

ESR-Series. User manual
574
Firewall should be disabled on the ingress interface.
esr(config-if-gi)# ip firewall disable
20.10 How to save the local copy of the router configuration?
If you need to copy the current running or candidate configuration on the router itself, you can use the copy
command specifying "system:running-config" or 'system:candidate-config' as the copy source, and the file in
the 'flash:data/' section as the copy destination.
esr# copy system:candidate-config flash:data/temp.txt
Also, it is possible to copy previously saved configuration files (automatically from the flash:backup/ section
or manually from the flash:data/ section) to the candidate configuration:
esr# copy flash:data/temp.txt system:candidate-config
esr# copy flash:backup/config_20190918_164455 system:candidate-config

ELTEX ESR Series Specifications

General

Model	ESR Series
Category	Network Router
Manufacturer	ELTEX
Management	Web interface, CLI, SNMP
Operating Temperature	0°C to 40°C
Dimensions	Varies by model
Weight	Varies by model
Routing Protocols	OSPF, BGP
WAN Interfaces	Ethernet, SFP
LAN Interfaces	Ethernet, SFP
VPN Support	IPsec, L2TP, PPTP
Firewall	Stateful packet inspection, ACLs
Power over Ethernet (PoE)	Available on some models
QoS	Traffic prioritization