ELTEX ESR Series User Manual

ESR-Series. User manual
341
•
•
•
12.7.1 Configuration algorithm
Step Description Command Keys
1 Configure addressing and one of IGP
on all P and PE routers
2 Configure LDP transport tag
distribution
3 Create VRF esr(config)# ip vrf <VRF> <VRF> – VRF instance name,
set by the string of up to 31
characters.
4 Specify route distinguisher for the
given VRF
esr(config-vrf)# rd <RD> <RD> – Route distinguisher
value, specified in one of the
following forms:
<ASN>:<nn> — where
<ASN> may take values
[1..65535], nn may take
values [1..65535];
<ADDR>:<nn>— where
<ADDR> specified as
AAA.BBB.CCC.DDD/EE,
AAA-DDD may take
values [0..255], nn may
take values [1..65535];
<4ASN>:<nn>— where
<4ASN> may take values
[1..4294967295], nn may
take values [1..65535];

ELTEX ESR Series Specifications

General

Model	ESR Series
Category	Network Router
Manufacturer	ELTEX
Management	Web interface, CLI, SNMP
Operating Temperature	0°C to 40°C
Dimensions	Varies by model
Weight	Varies by model
Routing Protocols	OSPF, BGP
WAN Interfaces	Ethernet, SFP
LAN Interfaces	Ethernet, SFP
VPN Support	IPsec, L2TP, PPTP
Firewall	Stateful packet inspection, ACLs
Power over Ethernet (PoE)	Available on some models
QoS	Traffic prioritization