ELTEX ESR Series User Manual

ESR-Series. User manual
466
•
•
•
•
•
•
15.2.2 Configuration example
Objective:
Configure L2TP server on a router for remote user connection to LAN. Authentication is performed on RADIUS
server.
L2TP server address: 120.11.5.1;
Gateway inside the tunnel: 10.10.10.1;
Radius server address: 192.168.1.4;
For IPsec, key authentication method is used: key–'password’.
Solution:
First, do the following:
Configure RADIUS server connection;
Configure zones for te1/0/1 and gi1/0/1 interfaces.
Specify IP addresses for te1/0/1 and te1/0/1 interfaces.

ELTEX ESR Series Specifications

General

Model	ESR Series
Category	Network Router
Manufacturer	ELTEX
Management	Web interface, CLI, SNMP
Operating Temperature	0°C to 40°C
Dimensions	Varies by model
Weight	Varies by model
Routing Protocols	OSPF, BGP
WAN Interfaces	Ethernet, SFP
LAN Interfaces	Ethernet, SFP
VPN Support	IPsec, L2TP, PPTP
Firewall	Stateful packet inspection, ACLs
Power over Ethernet (PoE)	Available on some models
QoS	Traffic prioritization