•
•
•
•
•
•
Step Description Command Keys
36 Enable the application control on the
interface (optionally).
esr(config-if-gi)# subscriber-
control application-filter <NAME>
<NAME> – application profile
name, set by the string of up to
31 characters.
37 Set/clear the upper bound of BRAS
sessions amount (optionally).
esr(config-subscriber-control)#
thresholds sessions-number high
<Threshold>
<Threshold> – number of BRAS
sessions:
[0-50000] – for ESR-1700
[0-10000] – for
ESR-1200/1000/1500
/1511/3100
[0-1000] – for
ESR-100/200
38 Set/clear the lower bound of BRAS
sessions amount (optionally).
esr(config-subscriber-control)#
thresholds sessions-number low
<Threshold>
<Threshold> – number of BRAS
sessions:
[0-50000] – for ESR-1700
[0-10000] – for
ESR-1200/1000/1500
/1511/3100
[0-1000] – for
ESR-100/200
18.2 Example of configuration with SoftWLC
Objective:
Provide access to the Internet only to authorized users.
Solution:
SoftWLC server keeps accounts data and tariff plan parameters. You can obtain more detailed information on
installation and configuring SoftWLC server using following links:
SoftWLC– general SoftWLC article;
SoftWLC installation and update– installation of SoftWLC from repositories.
The BRAS license is obligatory for router, after its activation you can start device configuring.
To Next Page
Loading...
Need help?
General
