ELTEX ESR Series User Manual

ESR-Series. User manual
535
•
•
•
•
•
•
Step Description Command Keys
13 Enable registration of changes to the
user settings (optionally).
esr(config)#logging userinfo
17.5.2 Configuration example
Objective:
Configure message sending for the following system events:
failed user authentication;
changes to the configuration of logging system events;
start/stop of the system process;
changes are made to the user profile.
ESR router IP address: 192.168.52.8, Syslog server IP address: 192.168.52.41. Use default settings for sending
messages – UDP protocol, port 514.
Solution:
First, do the following:
Specify zone for gi1/0/1 interface;
Configure IP address for gi1/0/1 interface.
1 Main configuration step:
Create a file on the router for syslog, the level of messages for logging – info:
esr(config)# syslog file ESR info
Specify the IP address and parameters of the remote Syslog server:
esr(config)# syslog host SERVER 192.168.17.30 info udp 514

ELTEX ESR Series Specifications

General

Model	ESR Series
Category	Network Router
Manufacturer	ELTEX
Management	Web interface, CLI, SNMP
Operating Temperature	0°C to 40°C
Dimensions	Varies by model
Weight	Varies by model
Routing Protocols	OSPF, BGP
WAN Interfaces	Ethernet, SFP
LAN Interfaces	Ethernet, SFP
VPN Support	IPsec, L2TP, PPTP
Firewall	Stateful packet inspection, ACLs
Power over Ethernet (PoE)	Available on some models
QoS	Traffic prioritization