ELTEX ESR Series - Integrity Check; Configuration Process

ESR-Series. User manual
536
Set the logging of failed authentication attempts:
esr(config)# logging login on-failure
Set the logging of syslog configuration changes:
esr(config)# logging syslog configuration
Set the logging of start/stop of the system process:
esr(config)# logging service start-stop
Set the logging of changes to the user profile:
esr(config)# logging userinfo
The configuration changes come into effect after applying the following commands:
esr# commit
Configuration has been successfully committed
esr# confirm
Configuration has been successfully confirmed
View the current syslog configuration:
esr# show syslog configuration
View the syslog entries:
esr# show syslog ESR
17.6 Integrity check
Integrity check involves checking the integrity of stored executable files.
17.6.1 Configuration process
Step Description Command Keys
1 Launch system integrity check esr# verify filesystem <detailed> detailed – detailed information
output to the console.