•
•
•
18 BRAS (Broadband Remote Access Server) management
Configuration algorithm
Example of configuration with SoftWLC
Example of configuration without SoftWLC
18.1 Configuration algorithm
Step Description Command Keys
1 Add RADIUS server to the list of used
servers and switch to its configuration
mode.
esr(config)# radius-server host
{ <IP-ADDR> | <IPV6-ADDR> }
[ vrf <VRF> ]
esr(config-radius-server)#
<IP-ADDR> – RADIUS server IP
address, defined as
AAA.BBB.CCC.DDD where each
part takes values of [0..255];
<IPV6-ADDR> – RADIUS server
IPv6 address, defined as
X:X:X:X::X where each part
takes values in hexadecimal
format [0..FFFF].
<VRF> – VRF instance name,
set by the string of up to 31
characters.
2 Set the password for authentication on
remote RADIUS server.
esr(config-radius-server)# key
ascii-text
{ <TEXT> | encrypted
<ENCRYPTED-TEXT> }
<TEXT> – string of [8..16] ASCII
characters; <ENCRYPTED-
TEXT> – encrypted password,
[8..16] bytes size, set by the
string of [16..32] characters.
3 Create AAA profile. esr(config)# aaa radius-profile
<NAME>
<NAME> – server profile name,
set by the string of up to 31
characters.
4 Specify RADIUS server in AAA profile. esr(config-aaa-radius-profile)#
radius-server host
{ <IP-ADDR> | <IPV6-ADDR> }
<IP-ADDR> – RADIUS server IP
address, defined as
AAA.BBB.CCC.DDD where each
part takes values of [0..255];
<IPV6-ADDR> – RADIUS server
IPv6 address, defined as
X:X:X:X::X where each part
takes values in hexadecimal
format [0..FFFF].
5 Create DAS server. esr(config)# das-server <NAME> <NAME> – DAS server name,
set by the string of up to 31
characters.
To Next Page
Loading...
Need help?
General
