ELTEX ESR Series User Manual

ESR-Series. User manual
460
•
•
•
•
•
16 Define the list of DNS servers that will
be used by remote users (optionally).
esr(config-pptp-server)# dns-
servers
object-group <OBJ-GROUP-
NETWORK -NAME >
<OBJ-GROUP-NETWORK-
NAME> – name of the IP
addresses profile that includes
required DNS servers
addresses, set by the string of
up to 31 characters.
17 Define the list of WINS servers that will
be used by remote users (optionally).
esr(config-pptp-server)# wins-
servers object-group
<OBJ-GROUP-NETWORK-NAME >
<OBJ-GROUP-NETWORK-
NAME> – name of the IP
addresses profile that includes
required WINS servers
addresses, set by the string of
up to 31 characters.
15.1.2 Configuration example
Objective:
Configure PPTP server on a router.
PPTP server address: 120.11.5.1;
Gateway inside the tunnel for connecting clients: 10.10.10.1;
IP address pool for lease: 10.10.10.5-10.10.10.25;
DNS servers: 8.8.8.8, 8.8.8.4;
Accounts for connection: fedor, ivan.

ELTEX ESR Series Specifications

General

Model	ESR Series
Category	Network Router
Manufacturer	ELTEX
Management	Web interface, CLI, SNMP
Operating Temperature	0°C to 40°C
Dimensions	Varies by model
Weight	Varies by model
Routing Protocols	OSPF, BGP
WAN Interfaces	Ethernet, SFP
LAN Interfaces	Ethernet, SFP
VPN Support	IPsec, L2TP, PPTP
Firewall	Stateful packet inspection, ACLs
Power over Ethernet (PoE)	Available on some models
QoS	Traffic prioritization