ELTEX ESR Series - Configuration Example

ESR-Series. User manual
297
•
•
•
Step Description Command Keys
The following functionality is also available as part of the LDP configuration:
LDP tag filtering configuration (see section LDP tag filtering configuration)
LDP session parameters configuration (see section Configuring session parameters in LDP)
t-LDP session parameters configuration (see section Configuring session parameters in targeted-LDP)
12.1.2 Configuration example
Objective:
Configure LDP communication between peers.
Solution:
1 ESR pre-configuration:
First, IP addresses must be assigned to the interfaces, the firewall must be disabled and one of the internal
routing protocols must be configured.