ELTEX ESR Series User Manual

ESR-Series. User manual
72
Figure 55 – Installed SFP transceivers
3.5.2 Transceiver removal
1. Flip the module handle to unlock the latch.
Figure 56 – Opening SFP transceiver latch
2. Remove the module from the slot.
Figure 57 – SFP transceivers removal

ELTEX ESR Series Specifications

General

Model	ESR Series
Category	Network Router
Manufacturer	ELTEX
Management	Web interface, CLI, SNMP
Operating Temperature	0°C to 40°C
Dimensions	Varies by model
Weight	Varies by model
Routing Protocols	OSPF, BGP
WAN Interfaces	Ethernet, SFP
LAN Interfaces	Ethernet, SFP
VPN Support	IPsec, L2TP, PPTP
Firewall	Stateful packet inspection, ACLs
Power over Ethernet (PoE)	Available on some models
QoS	Traffic prioritization