ELTEX ESR Series User Manual

ESR-Series. User manual
200
•
•
•
•
Ste
p
Description Command Keys
51 Enable XAUTH clients reconnection
mode with one login/password (server
only) (optional).
esr(config-ipsec-vpn)#security ike
session uniqueids <MODE>
<MODE> – reconnect mode,
may take the following values:
no – established XAUTH
connection will be
deleted if an
«INITIAL_CONTACT»
notification is sent for a
new XAUTH connection
by the initiator of the
connection, the
previously used IP
address will be assigned.
Otherwise, the
established XAUTH
connection will be
withheld. A new IP
address will be assigned
to the new XAUTH
connection.
never – established
XAUTH connection will
be withheld.A new IP
address will be assigned
to the new XAUTH
connection. The
«INITIAL_CONTACT»
notification will be
ignored anyway.
replace – established
XAUTH connection will
be deleted. The
previously used IP
address will be used for
the new XAUTH
connection.
keep – established
XAUTH connection will
be withheld. A new
XAUTH connection will
be rejected.

ELTEX ESR Series Specifications

General

Model	ESR Series
Category	Network Router
Manufacturer	ELTEX
Management	Web interface, CLI, SNMP
Operating Temperature	0°C to 40°C
Dimensions	Varies by model
Weight	Varies by model
Routing Protocols	OSPF, BGP
WAN Interfaces	Ethernet, SFP
LAN Interfaces	Ethernet, SFP
VPN Support	IPsec, L2TP, PPTP
Firewall	Stateful packet inspection, ACLs
Power over Ethernet (PoE)	Available on some models
QoS	Traffic prioritization