ELTEX ESR Series - Page 288

ESR-Series. User manual
288
•
•
•
•
•
•
•
•
S
t
e
p
Description Command Keys
1
8
Enable advertising of routes
received in an alternative way
(optionally).
esr(config-isis)#redistribute
bgp <AS> [ route-map
<NAME> ] [is-type <LEVEL>]
<AS> – stand alone system number, takes
values of [1..4294967295].
<NAME> – name of the route map that will be
used for advertised routes filtration and
modification, set by the string of up to 31
characters;
<LEVEL> – IS-IS protocol operation level:
level-1 – operate only on level 1;
level-2-only – operate only on level 2.
esr(config-isis)#redistribute
ipv6 bgp <AS> [ route-map
<NAME> ] [is-type <LEVEL>]
esr(config-isis)#redistribute
ospf <ID> <ROUTE-TYPE>
[ route-map <NAME> ] [is-type
<LEVEL>]
<ID> – process number, takes values of
[1..65535].
<ROUTE-TYPE> – route type:
intra-area – OSPF process routes
advertising within a zone;
inter-area – OSPF process routes
advertising between zones;
external1 – OSPF format 1 external
routes advertising;
external2 – OSPF format 2 external
routes advertising;
<NAME> – name of the route map that will be
used for advertised OSFP routes filtration and
modification, set by the string of up to 31
characters;
<LEVEL> – IS-IS protocol operation level:
level-1 – operate only on level 1;
level-2-only – operate only on level 2.
esr(config-isis)#redistribute
ipv6 ospf <ID> <ROUTE-
TYPE> [ route-map <NAME> ]
[is-type <LEVEL>]