ELTEX ESR Series User Manual

ESR-Series. User manual
324
•
•
•
•
•
•
Step Description Command Keys
8 Specify route target import for the given
VPLS instance.
esr(config-bgp)# route-target
import <RT>
<RT> – Route-target value,
specified in one of the
following forms:
<ASN>:<nn> — where
<ASN> may take values
[1..65535], nn may take
values [1..65535];
<ADDR>:<nn>— where
<ADDR> specified as
AAA.BBB.CCC.DDD/EE,
AAA-DDD may take
values [0..255], nn may
take values [1..65535];
<4ASN>:<nn>— where
<4ASN> may take values
[1..4294967295], nn may
take values [1..65535];
9 Specify route target export for the given
VPLS instance.
esr(config-bgp)# route-target
export <RT>
<RT> – Route-target value,
specified in one of the
following forms:
<ASN>:<nn> — where
<ASN> may take values
[1..65535], nn may take
values [1..65535];
<ADDR>:<nn>— where
<ADDR> specified as
AAA.BBB.CCC.DDD/EE,
AAA-DDD may take
values [0..255], nn may
take values [1..65535];
<4ASN>:<nn>— where
<4ASN> may take values
[1..4294967295], nn may
take values [1..65535];
10 Specify ve id. esr(config-bgp)# ve id <ID> <ID> — VPLS instance
identifier, specified in the range
[1..16384].
11 Specify vpn id. esr (config-bgp)# vpn id <ID> <ID> — VPN identifier, specified
in the range [1..4294967295]
12 Specify ve range (optional). esr (config-bgp)# ve range
<RANGE>
<RANGE> — range of VPLS
border device identifiers
[8..100].

ELTEX ESR Series Specifications

General

Model	ESR Series
Category	Network Router
Manufacturer	ELTEX
Management	Web interface, CLI, SNMP
Operating Temperature	0°C to 40°C
Dimensions	Varies by model
Weight	Varies by model
Routing Protocols	OSPF, BGP
WAN Interfaces	Ethernet, SFP
LAN Interfaces	Ethernet, SFP
VPN Support	IPsec, L2TP, PPTP
Firewall	Stateful packet inspection, ACLs
Power over Ethernet (PoE)	Available on some models
QoS	Traffic prioritization