EasyManuals Logo

ELTEX ESR Series User Manual

ELTEX ESR Series
575 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #353 background imageLoading...
Page #353 background image
ESR-Series. User manual
353
ESR1
Configure interface to the CE direction. Also create a route-map in which we specify the subnets allowed to be
advertised.
ESR1
interface gigabitethernet 1/0/2
ip vrf forwarding Customer1
description "Customer1"
ip firewall disable
ip address 192.168.32.1/30
Создаем route-map
route-map OUTPUT
rule 1
action permit
exit
exit
Configure eBGP between ESR1 and CE_SiteA.
ESR1
router bgp 65500
vrf Customer1
router-id 192.168.32.1
neighbor 192.168.32.2
remote-as 65505
update-source 192.168.32.1
address-family ipv4 unicast
exit
exit
Allow BGP routes to be transmitted to the peer.
ESR1
route-map OUTPUT out
enable
exit
enable
exit

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ELTEX ESR Series and is the answer not in the manual?

ELTEX ESR Series Specifications

General IconGeneral
ModelESR Series
CategoryNetwork Router
ManufacturerELTEX
ManagementWeb interface, CLI, SNMP
Operating Temperature0°C to 40°C
DimensionsVaries by model
WeightVaries by model
Routing ProtocolsOSPF, BGP
WAN InterfacesEthernet, SFP
LAN InterfacesEthernet, SFP
VPN SupportIPsec, L2TP, PPTP
FirewallStateful packet inspection, ACLs
Power over Ethernet (PoE)Available on some models
QoSTraffic prioritization

Related product manuals