ELTEX ESR Series - Page 373

ESR-Series. User manual
373
•
•
•
•
•
•
•
•
•
Step Description Command Keys
9 Set IPv4/IPv6 address that will be used
as source IPv4/IPv6 address in
transmitted RADIUS packets.
esr(config-radius-server)# source-
address { <ADDR> | <IPV6-ADDR> }
<ADDR> – source IP address,
defined as AAA.BBB.CCC.DDD
where each part takes values of
[0..255];
<IPV6-ADDR> – source IPv6
address, defined as X:X:X:X::X
where each part takes values in
hexadecimal format [0..FFFF].
10 Set radius as authentication method. esr(config)# aaa authentication
login { default | <NAME> }
<METHOD 1>
[ <METHOD 2> ] [ <METHOD 3> ]
[ <METHOD 4> ]
<NAME> – list name, set by the
string of up to 31 characters.
Authentication methods:
local – authentication by
local user base;
tacacs – authentication
by TACACS server list;
radius – authentication
by RADIUS server list;
ldap – authentication by
LDAP server list.
11 Set radius as authentication method of
user privileges elevation.
esr(config)# aaa authentication
enable <NAME><METHOD 1>
[ <METHOD 2> ] [ <METHOD 3> ]
[ <METHOD 4> ]
<NAME> – list name, set by the
string of up to 31 characters;
default – default list
name.
<METHOD> – authentication
methods:
enable – authentication
by enable passwords;
tacacs – authentication
by TACACS;
radius – authentication
by RADIUS;
ldap – authentication by
LDAP.