Specify protocol type for the rule:
esr(config-ips-category-rule)# protocol icmp
Since we specified the icmp protocol, we need to specify any as the port of the sender and recipient:
esr(config-ips-category-rule)# source-port any
esr(config-ips-category-rule)# destination-port any
We will indicate our server as the recipient address:
esr(config-ips-category-rule)# destination-address ip 192.168.1.10
Attacker can send packets from any address:
esr(config-ips-category-rule)# source-address any
To Next Page
Loading...
